EasyManua.ls Logo

Clevo N130WU - Problem Resolution Guide

Clevo N130WU
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
Problems and Possible Solutions 7 - 7
7
Problems and Possible Solutions
Problem Possible Cause - Solution
You turned on the power but it doesn’t
work.
Battery missing / incorrectly installed. Check the battery bay, make sure the
battery is present and seated properly (the design of the battery only allows it to
go in one way). Make sure there’s nothing interfering with the battery contacts.
The battery LED power indicator , is
blinking orange.
Low Battery. Plug in the DC power source. If the computer doesn’t start up
immediately, turn it off then on again.
You are losing battery power too quickly. The system is using too much power. If your OS has a Power Options scheme
(see “Power Plans” on page 3 - 5) check its settings. You may also be using a
peripheral device/USB device that is drawing a lot of power.
Power Button
Note that for the power button to function the
lid/LCD must be open.

Table of Contents

Other manuals for Clevo N130WU

Related product manuals