Clevo N130WU - Skylight 4 G Module Driver Installation

Modules & Options
6 - 50 3G/4G Module
6
Skylight 4G Module Driver Installation
If you have included a Skylight 4G Module in your purchase option then you will
need to install a driver to support the module. Follow the instructions below to install
the driver and then run the application to establish a connection (see “Skylight 4G
Application” on page 6 - 54).
1. Make sure the system is not in Airplane Mode, and then insert the Device
Drivers & Utilities + User’s Manual disc into an attached DVD drive.
2. Click Browse CD/DVD (button).
3. Browse to the following location (D: denotes your DVD drive on the Device
Drivers & Utilities + User’s Manual disc)
• D:\Options\4G_EM7430
4. Double-click the Generic7430DriverSetup.exe.
5. Click Next.
6. Click I Agree to agree to the license terms.
7. Click Install > Next.
8. Click Finish.
9. After the driver has been installed go to Device Manager (
Right-click the
Start Menu icon in the taskbar in the lower left corner of the screen and
select Device Manager) from the menu.
10. Click the arrow to expand the menu below Network Adapters,
11. Double-click Sierra Wireless EM7430 Qualcomm
™ @Snapdragon X7
LTE-A.