Clevo N130WU - Setup for Audio Recording

Features & Components
Audio Features 2 - 15
2
Setup for Audio Recording
To record audio sources on your computer at optimum quality follow the instruc-
tions below:
1. Go to the Control Panel .
2. Click Realtek HD Audio Manager (Hardware and Sound), or right-click the
taskbar icon and select Sound Manager.
3. Click Microphone Effects (tab) in Microphone (tab), and then click to select
Noise Suppression (button), or adjust the Recording Volume level to around 60,
to obtain the optimum recording quality.
4. Click OK to close the control panel and save the settings.

Disabling Front Jack
Detection
It is recommended that
you do not disable front
panel jack detection in
Connector Settings .
Disabling front panel jack
detection may cause
your internal microphone
to become disabled, and
audio may continue to
play through the sys-
tem’s internal speakers
even when headphones
are plugged-in to the
headphone jack (see
page 7 - 10).
Figure 2 - 14
Realtek Audio
Manager - Recording
Setup