Modules & Options
Thunderbolt Port Driver 6 - 21
6
Thunderbolt Port Driver
If you have included the Thunderbolt 3 port (factory option) in your purchase
configuration then you need to install the driver.
Before installing the Thunderbolt driver it is necessary to initialize the port first.
To do so simply insert any USB Type C device (e.g. a USB flash drive) into the port
(see Figure 1 - 8 on page 1 - 14). You may then install the driver as below.
1. Insert the Device Drivers & Utilities + User’s Manual disc into an attached
DVD drive.
2. Click Option Drivers (button).
3. Click 3.Install TBT Driver > Yes.
4. Click the check box to accept the license and then click Install.
5. Click Finish.
6. See also “Intel (R)Thunderbolt Support (Advanced Menu > Intel(R)
Thunderbolt)” on page 5 - 11 for Thunderbolt port configuration in the
BIOS.
To Next Page
Loading...
