Modules & Options
6 - 48 3G/4G Module
6
3G/4G Module SIM Card Installation
Insert the SIM card as illustrated below (pay careful attention to the orientation
of the card as the gold contact side of the card should face downwards) until it clicks
fully into position. To eject the card simply press it until it ejects, but do not attempt
to eject the card while connected to a 3G/4G network (see below).
SIM Card
Orientation
Note that the USIM
card’s readable side
(with the gold-colored
contacts) should face
downwards as illustrat-
ed.
Figure 6 - 38
USIM Card Insertion
1
SIM Card Ejection
Simply press on the SIM card to eject it, however do not do this while a connection is in
progress.
If you do eject the card while a 3G/4G connection is ongoing, you will need to shut down
the system, reinsert the SIM card, restart the system and then reestablish the 3G/4G con-
nection.
If you wish to change SIM cards then you will need to shut the system down, reinsert the
SIM card, restart the system and then reestablish the 3G/4G connection.
To Next Page
Loading...
