Video Driver Controls
Attaching Other Displays C - 25
C
To Enable Collage Mode:
1. Attach your external display to the appropriate port, and turn it on.
2. Go to the Intel(R) HD/UHD Graphics Control Panel control panel and click
Display > Multiple Displays (sub-menu).
3. Click Collage from the Select Multiple Display Mode menu.
4. Click Enable Collage and click On.
5. Click Vertical or Horizontal to arrange and displays as required.
6. Click Apply, and OK to confirm the settings change.
Collage Mode
Collage mode is used to
combine a number of
displays into a single
unified higher resolution
for larger screen sizes,.
Figure C - 22
Display > Multiple
Displays (Collage)
To Next Page
Loading...
