Clevo N151ZU - Removing the Battery

Disassembly
2 - 6 Removing the Battery
2.Disassembly
Removing the Battery
36W Battery Removal
1. Turn off the computer, turn it over to remove the keyboard (page 2 - 5).
2. Remove screws - (Figure 2a).
3. Remove the SD card cover and screws - on the bottom case (Figure 2b).
4. Carefully lift the bottom case up in the direction of the arrow at point and remove it (Figure 2c).
1
3
4
5
14
15
16

4. SD Card Cover
15. Bottom Case
•13 Screws
a.
b.
1
2
5
c.
9
6
7
8
3
10
11
12
13
4
14
15
16
Figure 2
36W Battery
Removal
a. Remove the screws.
b. Remove the SD cover
and screws.
c. Remove the bottom case.

Powering the
Computer On
After every disassem-
bly, make sure that the
bottom case’s screws
are all inserted and
tightened before turn-
ing the computer on.