Clevo N950TP6 - Removing and Installing the M.2 SSD Module

Disassembly
2 - 14 Removing and Installing the M.2 SSD Module
2.Disassembly
Removing and Installing the M.2 SSD Module
M.2 SSD Module Removal Procedure
1. Turn off the computer, turn it over, remove the battery (page 2 - 5).
2. The M.2 SSD module will be visible at point on the mainboard (Figure 10a).
3. Remove the screw
(Figure 10b)
4. The M.2 SSD module (Figure 10c) will pop-up, and you can remove it from the computer.
1
2
3
b.
c.
a.
2
3
1
3
3
2

3.M2 SSD Module
•1 Screw
Figure 10
M.2 SSD Module
Removal
a. Locate the M.2 SSD.
b. Remove the screw.
c. The M.2 SSD module
will pop up.