Clevo P375SM - Chapter 1: Quick Start Guide; Overview

Disassembly
Removing the Hard Disk Drive 2 - 9
2.Disassembly
Removing the Hard Disk(s) in the Secondary HDD Bay
1. Turn off the computer, and turn it over and remove the battery and any HDD in the upper slot.
2. The secondary hard disk bay is located under the first hard disk.
3. Grip the tab and raise the hard disk assembly up at an angle as illustrated (Figure 5a).
4. Lift the hard disk assembly out of the compartment.
5. Remove the screws - to release the hard disk from the case (Figure 5b).
6. Reverse the process to install any new hard disk(s).

2. Hard Disk Assembly
7. Hard Disk Case
8. Hard Disks
•4 Screws
Figure 5
Secondary HDD
Assembly Removal
a. Lift the secondary hard
disk assembly out off
the computer.
b. Remove the screws to
release the hard disk
from the case.
1
2
3
6
8
7
1
a.
3
4
b.
6
7
2
5
8