Clevo P375SM - Page 36

Disassembly
2 - 12 Removing the Keyboard
2.Disassembly
9. Remove the keyboard , and screws - from the keyboard shielding plate.
10. Reverse the process to replace the keyboard (make sure to reconnect the keyboard cable).
11. Push the center cover module down on the left side at point , and then slide the module to the right (as illus-
trated) and snap down to secure it in place.
12. Replace the screws on the bottom of the computer.
15
16
18
11
13
12
16
17
18
14
11
13
12
e.
15
f.
Keyboard Tabs

Re-Inserting the Keyboard
When re-inserting the keyboard
firstly align the five keyboard
tabs at the bottom (Figure 8f) at
the bottom of the keyboard with
the slots in the case.
15
Figure 8
Keyboard Removal
(cont’d.)
e. Disconnect the cable
from the locking collar.
f. Remove the keyboard.
g. Push the center cover on
the left side and the slide
toward the right to se-
cure it in place.

15. Keyboard
•3 Screws
19
g.
19