Clevo P375SM - Page 41

Disassembly
Removing and Installing the Processor 2 - 17
2.Disassembly
7. Turn the release latch (towards the unlock symbol , to release the CPU (Figure 13e).
8. Carefully (it may be hot) lift the CPU up out of the socket (Figure 13e).
9. See page 2 - 18 for information on inserting a new CPU.
10. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT).
7
8

Caution
The heat sink, and CPU area in general, contains parts which are subject to high
temperatures. Allow the area time to cool before removing these parts.
e.
f.
7
8
7

8. CPU
Figure 13
Processor Removal
(cont’d)
e. Turn the release latch to
unlock the CPU.
f. Lift the CPU out of the
socket.