Clifford Concept 650 - Page 74

27
© 2007 directed electronics
accessory b output
The transmitter channel programmed into this feature will activate the
accessory output.
silent mode
The transmitter channel programmed into this feature will arm/disarm
the system, but the siren will not chirp.
remote valet
The transmitter channel programmed into this feature will make the
system enter/exit valet mode.
remote start
z
This feature is only available with IntelliStart connected
z
The transmitter channel programmed into this feature will
activate or shut down the Intellistart remote start system.
window control
z
This feature is only available with SmartWindows connected
z
The transmitter channel programmed into this feature will
activate the vent or roll down feature of the SmartWindows
system.
accessory c output
The transmitter channel programmed into this feature will activate the
accessory output.
clear all remotes
z
This feature will erase all remote codes from the system
memory. This feature is convenient for erasing any transmit-
G919730P_01-07.qxd 1/12/07 3:39 PM Page 27
U
K
A
p
p
r
o
v
a
l
A
u
t
h
o
r
i
t
y
24-Mar-10