Clifford Concept 650 - User Selectable Features Descriptions - Column Three

26
blackjax* on/off
z
On: The system will enter BlackJax mode when triggered.
z
Off: The system cannot enter BlackJax mode.
user selectable features descriptions - column three
The features in this column pertain to programming individual trans-
mitter channels in custom configurations. Following is an explanation
of the features. The 4-button remote must be programmed using this
column as it cannot be autolearned.
arm/disarm only
The remote control channel programmed into this feature will arm/dis-
arm the system only. Once you have entered the feature press the but-
ton on the remote that will be used to arm/disarm the system. You will
hear 1 siren chirp. Then press the button again. You will hear 2 siren
chirps. The remote button will now arm/disarm the system.
To program the following channels use the instructions above for pro-
gramming the arm/disarm button except you only need to press the
button once.
accessory a output
The transmitter channel programmed into this feature will activate the
accessory output.
* This feature is not evaluated by Thatcham
nnoottee::
When programming a new remote control to custom configura-
tion a channel must first be programmed to this feature before pro-
gramming the remaining channels.
G919730P_01-07.qxd 1/12/07 3:39 PM Page 26
U
K
A
p
p
r
o
v
a
l
A
u
t
h
o
r
i
t
y
24-Mar-10