To Next PageTo Next Page
Need help?Do you have a question about the ClimateMaster iGate AWC99U01 and is the answer not in the manual?
General| Brand | ClimateMaster |
|---|---|
| Model | iGate AWC99U01 |
| Category | Thermostat |
| Language | English |
Contact information for technical assistance regarding the thermostat.
Important preliminary information for installers before starting.
Technical details and dimensions of the thermostat unit.
Guidelines for maximum wire lengths allowed for connections.
Factors to consider before beginning the physical installation.
Recommended placement for optimal thermostat performance.
Step-by-step guide for physically installing the thermostat.
Visual representation of correct thermostat connections.
Guide to configure thermostat settings via the mobile app.
Overview of user-configurable settings on the thermostat display.
Individual user preferences and operational options.
Setup and management of system alerts and reminders.
Configures the local time zone for thermostat operations.
Configuration options for the auxiliary heating mode.
Enables automatic switching between heating and cooling.
Manages gradual temperature transitions for energy efficiency.
Allows calibration of the thermostat's temperature sensor.
Tailors thermostat settings to the specific HVAC unit installed.
Sets heating and cooling capacity thresholds for the unit.
Adjusts thermostat sensitivity to temperature changes.
Threshold for heat rejection from cooling to potable water.
Threshold for prioritizing space heating over water heating.
Allows temperature droop before auxiliary heat engages.
Sets minimum airflow for heating mode.
Sets maximum airflow for heating mode.
Sets minimum airflow for cooling mode.
Sets maximum airflow for cooling mode.
Selects the type of internal flow device.
Configures the application for the loop.
Sets source water flow rate for heating mode.
Sets source water flow rate for cooling mode.
Settings for compressor delay and motorized valves.
Settings for domestic hot water pump operation.
Configuration settings for the hot water mode.
Enables manual control for troubleshooting and testing.
Selects the manual operation mode for the unit.
Selects manual output for specific thermostat functions.
Data related to compressor operation and status.
Data related to blower operation and status.
Data related to the loop system performance.
Data related to the refrigerant system status.
Other system diagnostic readings and statuses.
Data related to the hot water system performance.
Configuration settings via physical dip switches.
Stores and displays recent fault or warning codes.
Alerts for temperature or humidity deviations.
Guides linking the thermostat to the myUplink PRO portal.
