To Next PageTo Next PageWhat to do if CLIVET Electric Heater does not heat/cool as before?
If your CLIVET Electric Heater isn't heating or cooling as effectively as it used to, ensure that the filter is clean. Also, confirm that the hydraulic circuit is free from air by venting the heat exchanger.
What to do if CLIVET ELFOSPACEWALL2 appliance leaks water?
If your CLIVET Electric Heater is leaking water, ensure that the unit is properly sloped towards the condensate drain. Additionally, check that the condensate drain is not clogged.
Why CLIVET ELFOSPACEWALL2 Electric Heater motor does not rotate?
If the motor of your CLIVET Electric Heater isn't rotating or is rotating incorrectly, first, make sure the unit is receiving power. Next, check the wiring connections against the wiring diagram to ensure they are correct. Finally, verify that the main switch, seasonal commutator, and thermostat are all set to the correct positions.
General| Brand | CLIVET |
|---|---|
| Model | ELFOSPACEWALL2 |
| Category | Electric Heater |
| Language | English |
Recommendations for installing the condensate drain pipe correctly.
Precautions and requirements for electrical installation.
Cautionary notes regarding appliance usage and responsibility.
Rules for safe operation, handling, and installation of the appliance.
Critical warnings for installation, maintenance, and operation.
Criteria for selecting an optimal and safe installation site.
Visual guide showing the sequence for attaching the unit to the wall.
Schematic view of the electronic control board.
Key to understand the symbols and labels on the electronic board.
Settings for DIP switches to configure appliance operation.
How to choose between low, medium, high, or automatic fan speeds.
Guide to selecting Fan, Heating, Cooling, or Automatic modes.
How the unit automatically adjusts vertical flaps for cooling/heating.
How to manually adjust horizontal louvers.
How to program the appliance's stop time.
How to enable or disable the timer function.
Details on wiring and connections for the electrical heater.
Information on the self-resetting safety thermostat (B2).
