Cloud drive intelligent technology Co.,Ltd
Empower and serve the global eBike industry
Business Cooperation
Jim@clouddrive.tech
Page
9
of 19
6.6. Battery capacity indication
When the battery is fully charged, all five capacity indicators light up. When the battery is voltage
shortage, the last battery capacity indicator will flash, and the battery needs to be charged immediately.
Figure6-2 Battery capacity indication
6.7. Error code indication
When there is malfunction on the electronic control system of e-bike, the display will automatically
indicates the error codes. The error icon will flash and the electronic control system of e-bike will stop
working. The display will exit the error interface only when the malfunction is fixed.(The display won’t
work properly until malfunction fixed even if the display restarted). Please check attached Error Code
Definition Table for the error reasons.
6.8. Motor power indication
During the riding process, the controller will feed the motor power back to the display, so that the
display can indicate the motor power in real time. The higher the current value, the greater the motor
power.
To Next Page
