2
5. Find the SIM card slots located in the middle of your
phone. Each slot is labeled with a number (1 or 2).
6. Locate your SIM card and ensure it's the correct
size for your phone. Your phone can operate with 1
SIM card and it supports dual SIM functionality.
Each SIM slot requires a different insertion method.
To insert a SIM card in slot 1, place the SIM card face
down with the notch on the bottom right side.
Gently place the SIM holder down over the SIM card
and slide up to lock in place.
To insert a SIM card in slot 2, slide the SIM card into
the lower slot labeled 2 on the top right hand side of
the phone. Make sure to place the SIM card with the
notch side on the left. Refer to the SIM slot 2 diagram
on the phone to adjust the placement as necessary.
7. After the SIM card is inserted, reattach the back
cover to your phone by applying light pressure to
the back panel. Make sure to press the cover back
into place. Once your SIM card is installed, turn on
your phone, and wait a few minutes for your phone
to find a network.
NOTE
To avoid damage to phone, do not use any
other kind of SIM card, or any non-standard Nano
SIM card cut from a SIM card.
SIM Card 2 Slot
SIM Card 1 Slot
Memory SD
Card Slot
SIM Card 2 Slot
SIM Card 1 Slot
To Next Page
Loading...
