Operating instructions
3.7 Resetting the fire alarm system
Pressing the Reset switch restores the fire alarm system to its
normal state provided there are no inputs still in a latched
(active) condition. If any inputs are still in a latched condition at
the end of the reset cycle, sounders, if silenced, will re-sound and
the panel buzzer, if silenced, will re-sound.
Caution: Do not reset the fire alarm system until the proper
authorities have determined that the threat of fire is no longer
present.
To reset the fire alarm system:
1. Press Reset.
2. Enter the level 2 password.
To Next Page
Loading...