Clymac zm2 User Manual

ZM2 OPERATING AND MAINTENANCE INSTRUCTIONS
CONTENTS
1. System Overview
2. User responsibilities
3. “First Line” controls and indications
3.1 Logging on to the fire alarm system
3.2 Checking system status
3.3 Displaying or printing maintenance reports
3.4 Displaying the alarm history
3.5 Performing a lamp test
3.6 Silencing the panel buzzer
3.7 Resetting the fire alarm system
3.8 Silencing sounders
3.9 Sounding an alarm
3.10 Disabling and enabling a matrix group
3.11 Disabling and enabling a time control
3.12 Switching fire alarm sensitivity
3.13 Switching event message routes
3.14 Setting the system time and date
3.15 Restarting the fire alarm system

Clymac zm2 Specifications

General

Brand	Clymac
Model	zm2
Category	Smoke Alarm
Language	English

Summary

Fire Alarm System User Responsibilities

First Line Controls and Indications Guide

Logging On to the Fire Alarm System

Instructions for logging onto the system using different password levels to access command menus.

Checking Fire Alarm System Status

How to check system status including abnormal points, fire, supervisory, faults, monitor, and output conditions.

Displaying Maintenance Reports

Generating reports like Dirty>80%, Dirty>20%, Single Device, and Card Devices for sensor servicing.

Resetting the Fire Alarm System

Restoring the fire alarm system to its normal state provided no inputs are in a latched condition.

Silencing Fire Alarm Sounders

How to silence all audible, visible, and common alarm outputs except under specific conditions.

Sounding an Alarm Manually

Activating all audible, visible, and common alarm outputs to manually trigger an alarm.

Disabling and Enabling Matrix Groups

Disabling and Enabling Time Controls

Switching Fire Alarm Sensitivity

Switching Event Message Routes

Setting System Time and Date

Restarting the Fire Alarm System