Chapter 3
First Line Controls & Indications
Summary
This chapter provides instructions for operating the fire alarm
system from the control panel CPU/Display Unit. It is intended
for those who might be expected to operate the control panel in a
fire alarm emergency.
Content
3.1 Logging on to the fire alarm system
3.2 Checking system status
3.3 Displaying or printing maintenance reports
3.4 Displaying the alarm history
3.5 Performing a lamp test
3.6 Silencing the panel buzzer
3.7 Resetting the fire alarm system
3.8 Silencing sounders
3.9 Sounding an alarm
3.10 Disabling and enabling a matrix group
3.11 Disabling and enabling a time control
3.12 Switching fire alarm sensitivity
3.13 Switching event message routes
3.14 Setting the system time and date
3.15 Restarting the fire alarm system
To Next Page
Loading...