SECURITY LEVELS
The ACCEPT, RESET, SILENCE ALARMS & SOUND ALARMS keys are all protected
from unauthorised use through the use of either a numeric access code or a CONTROLS
ON/OFF key switch.
If a CONTROLS ON/OFF key switch has been fitted to the control panel then the above four
keys can be accessed when the key is in the ON position.
If a numeric code system is used then an access code will be required to be entered when one of
the above keys is operated. To enter your code type in the four digit number on the 20 key
function pad and press ↵ (enter). The function selected will be automatically executed if the
correct code is entered. The code will only need to be entered once if the keypad is continually
being operated. If however, no keys have been operated within 30 seconds then the system will
automatically log out the user and request a code be entered before one of the above four keys
can be operated. If having used the keypad you wish to quit the code and force the code to be
entered by the next user then press the F1 key on the 20 key numeric keypad.
http://www.firealarmengineers.com
To Next Page
Loading...
