3. “First Line” Controls and Indications
3.1 Panel controls and indications
This section lists the controls and indicators on the panel and briefly summarises their
purpose.
Controls Summary
The controls are now listed along with a brief note of their function. The control
functions are described in the appropriate following sections
Control Purpose
Accept key ACCEPT Acknowledges events and silence the
Internal buzzer
Reset key RESET Resets the system after accepting alarms
or faults.
Evacuate key SOUND ALARMS Raises a fire condition and sounds alarms.
Silence key SILENCE ALARMS Silences alarm sounders
Fire key FIRE Filters all zonal fire events to the display.
Fault key FAULT Filters all zonal fault events to the display.
Disabled key DISABLED Filters all zonal disable events to the display.
Info key INFO Filters all non fire/fault/disable events to
the display.
View VIEW POINTS Views the actual devices in alarm/fault/disabled
Restore Key RESTORE DISABLED Restores any previously disabled sounders +
ALARMS the remote manned centre outputs
Help HELP Shows help text on the relevant menu currently
being used
More MORE
Views queued events. The operator can move
forwards and backwards through queues
20 key numeric/function keypad To access menu driven software functions.
http://www.firealarmengineers.com
To Next Page
Loading...
