CM 602 Series User Manual

Part Number: 02805 Rev AA February 2017
HAND OPERATED LEVER HOIST
POLIPASTO MANUAL DE PALANCA
PALAN MANUEL À LEVIER
OPERATING, MAINTENANCE
& PARTS MANUAL
MANUAL DE FUNCIONAMIENTO,
MANTENIMIENTO Y PIEZAS
MANUEL D'ENTRETIEN,
D'OPÉRATION ET DE PIÈCES
Before installing hoist, fill in the information below.
Antes de instalar el polipasto, rellene los datos siguientes.
Enregistrez les informations suivantes avant de faire l'installation.
Rated Load / Carga Nominal / Charge nominale
Serial No. / N° de Serie / No. de Ser.
Purchase Date / Fecha de Compra / Date d'achat
CAPACITIES:
SERIES 602:
550 LBS (250 KG.)
SERIES 603:
1100 LBS (500 KG.)
Follow all instructions and warnings
for inspecting, maintaining and
operating this hoist.
The use of any hoist presents some risk
of personal injury or property damage. That
risk is greatly increased if proper instructions
and warnings are not followed. Before using
this hoist, each operator should become
thoroughly familiar with all warnings,
instructions and recommendations
in this manual. Retain this manual for
future reference and use.
Forward this manual to operator.
Failure to operate equipment as
directed in manual may cause injury.
CAPACIDADES DE CARGA:
SERIES 602:
550 LBS (250 KG.)
SERIES 603:
1100 LBS (500 KG.)
Siga todas las instrucciones y
advertencias para inspeccionar,
mantener y operar este polipasto.
El uso de cualquier polipasto presenta
algunos riesgos de daños a las personas o a
las cosas. Este riesgo se ve incrementado si
no se siguen correctamente las instrucciones
y advertencias. Antes de usar el polipasto
el operario debería estar familiarizado con
todas las advertencias, instrucciones y
recomendaciones de este manual. Guarde
este manual para futuras consultas.
Entregue este manual al operario. Si el
equipo no se maneja tal y como se
recomienda en el presente manual, es
posible que se produzcan situaciones
de peligro que pueden resultar en
daños personales.
CHARGES NOMINALES:
SERIES 602:
550 LBS (250 KG.)
SERIES 603:
1100 LBS (500 KG.)
Veuillez vous conformer à toutes les
instructions et avertissements d'inspection,
d'entretien et d'opération de ce palan.
L'utilisation de tout appareil de levage
comporte des risques de blessures ou
de dégâts matériels. Ces risques sont
de beaucoup accrus si les instructions
et avertissements ne sont pas suivis.
Tours les opérateurs devraient se
familiariser complètement avec toutes
les recommandations instructions et
avertissements de ce manuel avant d'utiliser
ce palan. Conservez ce manuel pour
utilisation et référence future.
Remettre ce manuel à l'opérateur.
L'utilisation de cet équipement contrairement
aux directives de ce manuel peut causer
des blessures.
SERIES 602/603
OPERATING, MAINTENANCE
& PARTS MANUAL
SERIES 602 SERIES 603

CM 602 Series Specifications

General

Type	Chain Hoist
Capacity	250 kg to 5000 kg
Lifting Capacity	250 - 5, 000 kg
Standard Lift	3 m
Brand	Columbus McKinnon

Summary

Product Introduction and Safety Overview

Series 602/603 Lever Hoist Capacities

Lists load capacities for Series 602 (550 lbs) and Series 603 (1100 lbs).

General Operator Safety

Emphasizes reading and understanding all warnings and instructions before use.

Parts and Service Availability

Locating Service Centers

Provides contact information to find the nearest parts or service center.

Detailed Safety Precautions

Critical Operation Warnings

Lists critical safety instructions for preventing death or serious injury during hoist operation.

Operational Cautions and Best Practices

Provides guidelines to avoid minor or moderate injury and ensure safe operation.

Environmental and Load Handling Restrictions

Details conditions and load types to avoid for safe hoist use.

Installation Guide

Installation Steps and Preparations

Step-by-step guide for installing the lever hoist correctly and ensuring proper rigging.

Installation Safety Warning

Warns against improper use causing injury or property damage during installation.

Operation Guide

Pre-Operation Checks and Familiarization

Advises users to familiarize themselves with hoist parts and check for proper function before use.

Free Chaining Mode Operation

Instructions on setting and using the free chaining mode for quick load attachment.

Lever Hoist Operating Procedures

Details on rigging, lifting, pulling, and lowering loads with the lever hoist.

Maintenance and Inspection

Reassembly Guidelines

Key points to observe when reassembling the hoist after disassembly.

Inspection Schedule and Acceptance Criteria

Defines inspection frequency, items, methods, and acceptance levels for hoist components.

Repair Parts and Ordering

Series 602/603 Parts List

Provides part numbers for specific components of the Series 602/603 lever hoist.

Ordering Replacement Parts

Details the necessary information required when ordering replacement parts.

Product Warranty Information

Warranty Limitations and Remedies

Outlines the warranty terms, limitations, and available remedies for defects.

Indemnification and Safe Operation Clause

Buyer's responsibilities regarding safe operation and indemnification.

CMCO Hoist Warranty Specifics

Details the warranty period for electrical and mechanical components of hoists.