13
◆
Secondary engraving practice
Now, we can use the auxiliary operating platform. Double color plate is one of the most commonly
used engraving materials, which is shown as the following picture:
① Stick double-faced adhesive tape on the back of the double color plate;
② Paste it on the milled plane of the auxiliary operating platform, and press it to make it stickfast;
③ Tool setting;
④ Begin to engrave;
⑤ Get engraved works;
⑥ Display the finished products;
There is a file in the "tool path for machine test" of the random CD, with the file name of
"shuangseban.nc". The area of this engraving file is about 75*85mm. Because the double color plate is
pasted on the auxiliary operating platform, the size of the material should within the scope of 90X90mm.
Meanwhile, the initial point of this file is on the top left corner.
The application of engraving machine is easy, which can be summarized as: clamping
materials, tool setting, and engraving. However, just as operating the computer, some people use
computer just for entertainment, so it lacks of required skills; some people make design for
creation, so they make great efforts for it. Therefore, the same computer may play different roles
for people with different requirements. It is the same for the engraving machine, because it is only
To Next Page
Loading...
General