1
■
Read before using:
●
This machine is only designed for the surface engraving of plastics, bamboo and timber, and
non-ferrous soft metal, so the application with other purposes may damage it;
●
Before using this machine, one must wear protective goggles, to avoid the damage from
scrapping eruptions;
●
Do not try to disassemble the machine or electric cabinet for reconstruction or fixing,
otherwise it is not under warranty;
●
Please pay attention to the electricity safety as other electric appliances, use ratified standard
voltage, and make sure that its electrical grounding is safe;
●
Do not place the machine in moist or dusty environment, and do not let children get close to
or touch it ;
●
Timely cleaning and periodic maintenance can keep the engraving machine in good
operating state, and also lengthen its service life;
●
This engraving machine is a mechatronics processing tool, so User should grasp relative
professional knowledge to be proficient in using this machine;
●
This manual only provides instructions to the application environment and operation
requirements of this machine, while not involving other professional knowledge that relate to
control computer, software, and materials. Please ask for help from your suppliers if you have
any problems in these aspects.
■
Basic workflow of engraving machine:
①
Install "control software Mach3" on the desktop computer, and setup parameters for the
control software in accordance with the requirements of engraving machine;
Congratulations! You already have your own numerical control engraving machine, but you
need to carefully know it and master it, in order to make it your good assistant as soon as
possible.
Before installing and using this machine, you must read carefully about this manual. Please
properly preserve this manual for reference in the future.
To Next Page
Loading...
General