12
①
leave certain margin when clamping materials, so as to avoid the cutter from touching screws;
② remember to reset the triaxial coordinates after tool setting;
③
remember to adjust the speed adjustment button of the principal axis to the zero position in
anticlockwise direction.
◆ Install auxiliary operating platform for your engraving machine
● What is auxiliary operating platform?
Auxiliary operating platform is a board installed on the original operating platform of the machine, and
it can replace the original operating platform;
● Why it is necessary to install an auxiliary operating platform?
In order to not damage the original operating platform when doing cutting operation; We usually cut
some boards with the engraving machine, but if without the auxiliary operating platform, it may cut the
operating platform in the process of cutting the board, thus permanently damaging the operating
platform. Therefore, we need an auxiliary platform, which is also called backing plate. In this way, we
can cut the board and not damage to the original operating platform of the machine.
It is very easy to install the auxiliary operating platform, and it only needs to fix a soft board (e.g.
PVC, PMMA, or wood board) on the original operating platform of the machine. Then, make an
engraving file and let engraving machine mill the auxiliary operating platform, with the purpose of
obtaining higher evenness. It is also the most efficient method to engrave double color plate, PCB or
other materials that ask for higher demand of flatness.
As shown in the picture: first, clam a PVC board with the thickness of 10mm on the original
operating platform of the machine, then mill a plane, and obtain an auxiliary operating platform with
high flatness at last. If the object you engrave is usually not large, then you only need to install it on the
latter part of the machine, so that it can be applied for a long time and no need to be disassembled.
To Next Page
Loading...