CNET CSH-1600W User Manual

Fig 5-12
A. IP address:
If the Switch is not a DHCP Client, select “Disable” for DHCP Client and fill out the IP Address, Subnet Mask
and Default Gateway information fields. Otherwise, select “Enable” in DHCP Client column.
B. Boot Version, Firmware Version and MAC Address of the Switch.
C. Device Name, Model Name, and Description of the switch (needs to be filled out by user).
D. Parent's Name or IP Address (if more than one S.A.W.M. switch are connected together, you can show the
root by this setting).-Needs to be filled out.
5.2.8 Advanced Configuration
24

CNET CSH-1600W Specifications

General

Brand	CNET
Model	CSH-1600W
Category	Switch
Language	English