CO/Tech J1x-JF2-210 User Manual

5
ENGLISH
12.Fasten the workpiece securely.
Useclampsorscrewclampswherepossibletoallowyoutohandletheworkpiece
withbothhands.Thisissaferthanholdingtheworkpiecewithonehand.
13.
Do not overreach.
Makesureyoualwaysstandrmlyandwell-balanced.
14.
Maintain the tools.
Assuretheyarecleanandthatthebladesaresharptoachievetheoptimaleffect
andasaferesult.Followtherecommendationsinthemanualpertainingtogreasing
andreplacementofparts.Checkthepowercordregularly,andifitisdamagedit
shouldbereplacedbyaqualiedservicetechnician.Checkallextensioncords
regularlytomakesuretheyarenotdamaged.Makesurethehandlesofthe
machine/toolandleversareclean,dry,andcompletelyfreeofoil,grease,etc.
15.
Turn off the power.
Unplugthedeviceandpushtheemergencybrake,ifthereisone,beforeservice
andwhenreplacingpartssuchasplaningirons,drillbits,sandingbelts,orblades.
16. Remove all keys and service tools.
Makeitahabittoverifythatallspannersandservicetoolsareremovedfrom
themachinebeforeturningonthepower.
17.
Avoid unintentional start.
Donotcarryatoolwithyourngeronthepowerswitchifitispluggedin.
AssurethepowerswitchisOFFwhenplugginginthedevice.
18. Use the correct extension cords.
Ifusingextensioncordsoutdoors,useonlythoseintendedforoutdooruse.
Useextensioncordswithsufcientrange,unrolltheentirecord.
19.
Use common sense and caution.
Thinkthrougheachtaskbeforeperformingit,sothatitisperformedinasafe
manner.Neverusethemachine/toolwhenyouaretired,undertheinuenceof
medication,etc.
20.
Make sure that all parts are undamaged. Before starting the tool, make
sure that:
• allcoversandadditionalpartsareundamagedandoperatecorrectly
• thatmovablepartscanrotatefreelyandareaimedintherightdirection
• thatnomoveablepartscangetcaught,thatnodefecthasoccurred,and
othercircumstancesthatmayaffecttheoperationofthetask.
 Adamagedcoverorotherpartshouldberepairedbyaqualiedtechnicianor
replaced.Damagedpowercordsandpowerswitchesmustalwaysbereplaced
byaqualiedtechnician.Neverusethetoolifyouareunabletoswitchitoffor
startitinasafemanner.
21.
Use recommended attachments.
Theuseofnotrecommendedattachmentsmaycauseaccidentsorpersonalinjury.
22.
Repair by a qualied technician.
Thetoolcomplieswithallsafetyregulations.Repairsofthetoolmustalways
beperformedbyaqualiedprofessional,usingoriginalparts,orthetoolmay
causeaccidentsorpersonalinjury.

CO/Tech J1x-JF2-210 Specifications

General

Brand	CO/Tech
Model	J1x-JF2-210
Category	Saw
Language	English