To Next Page

To Previous Page

ENGLISH

39.Clamproundworkpieceswithappropriatedevices,sothattheycannotrotate.

40.Neversawthroughworkpiecescontainingnailsorotherforeignobjects.

41.Alwaysstandatthesideofthesawbladewhilethemachineisinuse,sothat

thebladedoesnotstrikeyouifitshouldbrake.

42.Alwayspresstheworkpieceagainstthetableandthefasteningdevicesothat

itcannotturnormoveduringthesawing.

43.Neversawthroughseveralworkpiecessimultaneously.

44.Nevertrytoremovedust,akes,orwoodthathasattacheditselfwhilethe

bladeisrotating.Ifyoumustadjustthemachineorremovedebris,alwaysrst

turnthemachineoffandunplugit.

45.Alwaysturnthemachineoffandunplugitbeforechanging,adjusting,or

cleaningthemachine,ormeasuringtheworkpiecetobesawed.

46.Turnthemachineoffandunplugitbeforeleavingtheworkplace.

47.Electricinstallation,repairs,andmaintenanceshouldonlybeperformedby



aprofessional.

48.Allcoversandsafetydevicesmustberestoredimmediatelyafterrepair



ormaintenance.

49.Itisimportanttoadheretothesafety,use,andmaintenanceinstructionsofthe

manufacturer,aswellastoadheretothedimensioninstructionsindicatedin

“technicaldata.”

50.ItisnecessarytoadheretotherulesoftheLabourProtectionBoardaswellas

othergeneralsafetyrules.

51.Onlyusethemachinewithdustsuctioninaclosedroom,iftheroomhas

inowingair,toavoidcreatingavacuumintheroom.

52.Thesawshouldonlybeconnectedtosocketswith230Vsecuredwithatleast

a10Afuse.

53.Damagedsafetydevicesandpartsmustbereplacedorrepairedbya

professionalatanauthorizedservicefacility.

54.Thismachinecomplieswithallrelevantsafetyregulation.Themachinemust

onlyberepairedbyaprofessionalatanauthorizedservicefacilityusing

originalspareparts.Unlessyouadheretothisrule,itmayleadtoaccidents

andexposetheusertodanger.

CO/Tech J1x-JF2-210 User Manual

Questions and Answers: