CO/Tech LBC 36 User Manual (English)

Questions and Answers:

C
Christopher LaraAug 1, 2025
Why won't my CO/Tech LBC 36 start?
- A
  Anthony NelsonAug 1, 2025
  If your CO/Tech Trimmer engine won’t start or runs at low speed, several factors could be the reason. It might be due to an incorrect starting procedure, so check the instruction manual. A faulty spark plug could also be the culprit; try cleaning or changing it. Other potential causes include dirt in the carburettor, which would require a qualified technician to clean, or a clogged fuel filter, which you can change yourself, as it is inside the fuel tank.
T
Troy TranAug 7, 2025
What to do if my CO/Tech Trimmer starts but loses power?
- J
  Jonathan ReyesAug 7, 2025
  If your CO/Tech Trimmer starts but experiences a loss of power, there are a few things to check. First, the choke setting might be wrong, so try opening the choke. It could also be due to a dirty air filter, which you should clean or change. Another possibility is dirt in the carburettor, which would need to be cleaned by a qualified technician.
J
John LopezAug 13, 2025
Why is my CO/Tech LBC 36 Trimmer losing power under load?
- J
  Jeremy LindseyAug 13, 2025
  If your CO/Tech Trimmer loses power under load, the issue might be a faulty spark plug. Try cleaning or changing the spark plug to resolve this.
E
Eric CarlsonAug 19, 2025
What to do if the CO/Tech LBC 36 engine doesn’t respond to the throttle?
- W
  wwareAug 20, 2025
  If the engine of your CO/Tech Trimmer isn’t responding to the throttle, it might not be adequately warmed up. Allow the engine to idle for a minute to see if that resolves the issue.