CO/Tech RP8242 - Troubleshooting guide; Specifications

9
ENGLISH
10. Troubleshooting guide
I cannot jump start my vehicle.
• Make sure theswitch (7) is in theON position
• Press theTest button (10) to make sure that thejump starter is fully charged. Chargeit if needed.
• Make sure thecables are correctly connected and with thecorrect polarity.
The USB port doesn’twork.
• Make sure that thepower switch (1) is pressed in and that theUSB light ison.
• Press theTest button (10) to make sure that thejump starter is fully charged. Chargeit if needed.
The LED worklight doesn’twork.
• Press thepower switch (8).
• Press theTest button (10) to make sure that thejump starter is fully charged. Chargeit if needed.
Compressor does not inflate.
• Make sure thecompressor power switch (15) is in theON position.
• Make sure that thejump starter’s battery is fully charged, charge it if necessary.
• Make sure that thecar valve is pushed as far as possible into theair hose nozzle so that thelocking lever
can be lowered (when inflating tyres) and that thevalve adaptor nozzles are inserted in theair hose nozzle
(when inflating products without valves).
11. Disposal
Follow local ordinances when disposing of this product. Ifyou are unsure of how to dispose
of this product, please contact your municipality. Lead-acid (Pb) batteries can be recycled.
Theyshould not be disposed of like normal household waste.
12. Specifications
Charging current 450 Ainstantaneously, 300 Aafter 5 seconds
Battery Maintenance-free 12 V, 17 Ah sealed lead/acid battery
LED worklight 1 white LED with long operating life
USB port 5 V DC, 500mA
12 V socket For cigarette lighter plug, max 5A
Air compressor, max pressure 120 psi/8.28bar
AC charger Power supply 220–240 V, 50Hz
Size 340×280×195mm
Weight 7.5kg