Chapter 5: Configuration with web interface
98-169085-B Advanced settings 95
5. Type in a suitable name for the filter.
6. Select the item(s) you want to use for filtering and enter the details for the item(s). You can
select one or more of the following items:
• Use global IP filter.
Traffic to and from the IP address or network (subnet mask) entered here is
automatically routed to the connection type associated with this traffic flow filter.
• Use protocol number filter.
This is the type of protocol that is used for the data traffic. E.g. if this is set to 17 (UDP),
the filter will automatically route UDP data traffic to the connection type associated
with this traffic flow filter.
To Next Page
Loading...
