98-169085-B To unpack 4
Chapter 2
To install the system
2
This chapter describes how to install the EXPLORER 323 on a vehicle and connect cables. It has the
following sections:
• To unpack
• To place the terminal
• To install the terminal
• To connect cables
To unpack
Unpack your EXPLORER 323 and check that the following items are present:
• EXPLORER 323 Terminal with plastic spacers mounted
• Cable for combined LAN and DC power (6 m)
• Torx bit for the screws in the cover for the SIM compartment
• Mounting bolts and washers
• EXPLORER 323 Installation guide
Inspect all units and parts for possible transport damage.
To Next Page
Loading...
