Chapter 5: Configuration with web interface
98-169085-B To manage VoIP phones or smartphones (Not M2M) 67
To manage VoIP phones or smartphones in your EXPLORER 323
Do as follows:
1. Connect your smartphone to the WLAN interface or your VoIP phone via a switch to the
LAN interface. For details, see To connect a VoIP phone or smartphone on page 40.
2. In the web interface, select
(Control panel) > IP handsets.
3. Click the tile for the handset number you want to manage.
4. Select Enable to enable the handset.
•
on the tile for your handset means the handset is disabled.
•
on the tile for your handset means the handset is enabled.
5. To change the Password, simply type in the new number.
6. Click Save.
7. In the smartphone or IP handset, enter the local number and the password you just
entered in the EXPLORER 323. See the documentation for your handset for details.
The handset remains in the list after disconnecting. When the handset is connected again, it is
automatically recognized and ready for use, if enabled.
It may take some seconds to enable the handset.
The user name is also the local number for the handset.
To Next Page
Loading...
