1111
5
Point the antenna (BGAN)
To obtain optimum bandwidth and
operating time, adjust the position of the
EXPLORER 510 to maximum signal strength.
Do as follows:
1. Find the approximate direction of the
satellite.
See Satellite coverage on page 13 for a
map with the location of the satellites.
2. Use the pointing sound to find the
highest possible signal strength, while
slowly rotating and tilting the
EXPLORER 510 in the direction of the
satellite.
If you need to see signal strength, you
can connect your smartphone, start the
EXPLORER Connect app
1
and select
Pointing to follow the pointing process
on screen.
3. Push the power button briefly or select
OK in the EXPLORER Connect app to
accept when you have obtained the
highest possible signal strength.
The EXPLORER 510 now starts to establish a
connection to the BGAN network.
NOTE: You must start your data connection
manually before you can use it. See Connect
to the Internet on page 7.
When you are not using your data
connection, stop the connection or
disconnect your device to avoid being
charged for any unwanted transmission.
To restart the pointing process, select
Pointing from your EXPLORER Connect app.
1. Or access the web interface, see Access the EXPLORER 510 web interface on page 6.
To Next Page
Loading...
