COBHAM EXPLORER 540 - Status Message Explanations

Appendix B: Command reference
98-148232-B AT commands 107
Message (SMS) configuration AT commands
The following AT commands are used for configuration of SMS.
Note
For details on parameters for the message configuration commands, see the 3GPP
standard ETSI TS 127 005 V4.2.1.
Command Parm1 Parm2 Parm3 Parm4 Function
+CSMS <service>
Select Message Service
+CPMS <mem1> [<mem2> [<mem3>]
]
Preferred Message Storage
+CMGF <mode>
Message Format
+CSCA <sca> [<tosca>]
Service Center Address
+CSMP [<fo> [<vp> [<pid> [<dcs>]]]
]
Set Text Mode Parameters
+CSDH <show>
Show Text Mode Parameters
+CNMI [<mode> [<mt> [<bm> [<ds>]]]]
New Message Indications to TE
+CMGL <stat>
List Messages
+CMGR <index>
Read Messages
+CMGS <da/mr> [<toda/scts
>]
Send Message
+CMGD <index>
Delete Message