Chapter 3: Service and repair
20 Exchanging the fuses
3.2 Exchanging the fuses
The SAILOR 6080 Power Supply has fuses to secure AC input and input
from an external battery.
3.2.1 Exchange the AC fuse
To exchange the AC fuse, do as follows:
1. Locate the fuse, it is accessible from outside the housing. It is positioned
next to the on/off switch.
2. Turn the fuse holder and extract it.
3. Take out the old fuse and insert a new one (type: 5x20 mm, 6.3 AT).
4. Insert and fasten the fuse holder.
Fuse, AC input
2 fuses, battery input
Caution! If the AC fuse is blown directly after being
replaced there might be a critical fault in the
SAILOR 6080 Power Supply. Return the unit for
repair.
To Next Page
Loading...
