Chapter 3: Service and repair
Returning units for repair 21
3333
3.2.2 Exchange the BATTERY fuses
To exchange the two BATTERY fuses, do as follows:
1. Locate the fuses for battery plus and battery minus. These are accessible
from outside the housing, They are is positioned to the right of the
protective lid.
2. Pull out the fuses.
3. Insert two new fuses (type: ATO Blade Fuse, 20 A)
3.3 Returning units for repair
Should your Cobham SATCOM product fail, please contact your dealer or
installer, or the nearest Cobham SATCOM partner. You will find the partner
details on www.cobham.com/satcom, Technical Service Partner List.
You can also access the Partner Portal at www.cobham.com/satcom,
Cobham SYNC Partner Portal, which may help you solve the problem.
Your dealer, installer or Cobham SATCOM partner will assist you whether
the need is user training, technical support, arranging on-site repair or
sending the product for repair. Your dealer, installer or Cobham SATCOM
partner will also take care of any warranty issue.
To Next Page
Loading...
