COBHAM Sailor 6390 Navtex User Manual

5
Chapter 2
22222
Operation
Operation 2
This chapter has the following sections:
• Operation – SAILOR 6004 Control Panel
• Operation with INS equipment
Operation – SAILOR 6004 Control Panel
As soon as DC power is provided the SAILOR 6390 Navtex Receiver is on.
To switch on the SAILOR 6004 Control Panel push the power
button. Operate the SAILOR 6004 Control Panel by tapping the
touch screen. To switch off the SAILOR 6004 Control Panel
push and hold the power button for 2 seconds and follow the
instructions on the screen.
Tap the Navtex icon.
The icon System holds the application manager and settings for the
SAILOR 6004 Control panel. For more details see Software update on
page 21.
Note
When the remote switch in the SAILOR 6004 Control Panel is
wired and it is switched on, you can only use the Power button to
reboot the SAILOR 6004 Control Panel, you cannot switch it off.
98-137261.book Page 5 Wednesday, February 19, 2014 2:06 PM

COBHAM Sailor 6390 Navtex Specifications

General

Brand	COBHAM
Model	Sailor 6390 Navtex
Category	Receiver
Language	English