COBHAM Sailor 6390 Navtex User Manual

Chapter 3: Service & maintenance
Alarms and notifications 19
33333
Service & maintenance
Alarms and notifications
Overview
If an alarm is reported from the SAILOR 6390 Navtex Receiver a flashing
red triangle appears in the bottom bar of the SAILOR 6004 Control Panel
display:
• Flashing, bright red triangle: Unacknowledged alarm(s).
• Faded red triangle: Acknowledged alarm(s).
To acknowledge an alarm do as follows:
1. Tap the flashing, bright red triangle to display the list with active alarms.
2. Tap the alarm to acknowledge the alarm.
When all active alarms are acknowledged the bright red triangle turns into a
faded red triangle.
Alarms and notifications are either shown in the display of the SAILOR
6004 Control Panel or output via NMEA sentences and displayed in other
equipment.
Unread SAR
message
or alarm
Unread
Nav and
Met
warning
98-137261.book Page 19 Wednesday, February 19, 2014 2:06 PM

COBHAM Sailor 6390 Navtex Specifications

General

Brand	COBHAM
Model	Sailor 6390 Navtex
Category	Receiver
Language	English