Chapter 2: Operation
Operation – SAILOR 6004 Control Panel 13
22222
Operation
To filter message types do as follows:
1. From any list of messages (Unread, Tagged or All), tap the menu icon
and then Filters.
2. Tap Printer, Display or INS to select for which output you want to set
up a filter.
3. Tap Message types.
4. Tap the frequency you want to set up a filter for, e.g. 490 kHz
Message types.
5. Swipe and select the message types you want to receive on this
frequency. A, B, D and L are mandatory.
6. Tap Apply. The selected message types are displayed directly below the
frequency.
To copy filter settings
You can copy the filter settings from one output mode to another, e.g. from
Display to INS and Printer
To copy filter settings do as follows:
1. While in the Filter mode tap the menu icon.
2. Tap Copy to...
3. Tap the filter you want to copy to, e.g. from Printer to Display or INS.
Note
You cannot copy if the destination filter is set to Automatic
Mode.
98-137261.book Page 13 Wednesday, February 19, 2014 2:06 PM
To Next Page
Loading...
Need help?
General
