EasyManuals Logo

Cobra CDR 820 User Manual

Cobra CDR 820
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
English
16 17
Adjusting Camera Settings
To Adjust General Settings
General Settings
Beep Sound
If you don’t want the device to beep on every button press, turn
this option OFF.
Idle Power Off Automatically turns the unit off if no buttons are pressed within 1
or 5 minutes if no video is being recorded.
Date/Time
Use this to set the current time and date.
Date Format
Sets the date format.
HDMI
®
Output
Lets you choose between 720P and 1080P on the HDMI
®
Output.
Screen Flicker
This sets the screen refresh rate. Options include 50 Hz and 60 Hz.
USB Function If you want your camera to behave like a Mass Storage device
(ash drive) when connected to a computer, select MSDC. If you
want to use it as a webcam with your computer, select PCAM.
Screen Rotate
Allows you to ip the screen vertically for upside-down operation.
Screen Saver Allows you to set a timeout for the screen to go black when not in
use. Options include 1 minute and 3 minutes.
G-Sensor Level
Sets the sensitivity of the G-Sensor, from 0 (off) to 4 (max)
Motion Detector
Sets the sensitivity of the Motion sensor, from 0 (off) to 3 (max)
Restore Defaults
Resets the system to its default settings.
Format SD-Card If you want to completely erase all the movies and les on the SD-
card, select this option. Be careful; all your data will be lost.
SD-Card INFO
See how much space remains on the SD Card.
FW Version
Get the rmware version information.
NOTE: If you are currently recording video ( ) you’ll
need to stop recording with the Record button rst.
While in VIDEO or STILL PHOTO mode, press the
MENU button once to enter the menu selection
screen. Press the down arrow until General Settings
is highlighted, then press MODE to conrm.
Press the UP and DOWN arrows to select the setting
you’d like to modify, then press the MODE button to
conrm.
A window on the right edge of the screen will display
the available options. Use the UP and DOWN arrows
to make your selection, then press MODE to conrm.
A list of the settings and their meanings are shown on the
next page.
Adjusting Camera Settings
Your Dash Cam
Your Dash Cam

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cobra CDR 820 and is the answer not in the manual?

Cobra CDR 820 Specifications

General IconGeneral
Product colorBlack
White balanceAuto
G-shock sensorYes
GPS (satellite)No
Languages supportRUS, CHI (SIMPL), DEU, DUT, ENG, ESP, FRE, POR
Number of cameras1
Main camera sensorCMOS
Maximum frame rate60 fps
Main camera resolution1920 x 1080 pixels
Main camera viewing angle118 °
Video compression formatsAVI, H.264
Main camera sensor resolution5 MP
Display diagonal1.5 \
Built-in storage media-
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power source typeBattery, Cigar lighter
Image formats supportedJPG
Maximum image resolution4032 x 3094 pixels
Cables includedUSB
Included memory card size8 GB
Weight and Dimensions IconWeight and Dimensions
Depth38.1 mm
Width45.72 mm
Weight38 g

Related product manuals