Cobra CDR855BT User Manual

8 | P a g e
CDR895D INSTALLATION
MOUNT
CAM 1 - Screw the suction cup into the Quick
Release Mount. Slide the mount into CAM 1
and press the lever to secure the unit to your
vehicle’s front windshield.
CAM 2 – Attach CAM 2 to the windshield using the adhesive
tape. CAM 2 is most commonly installed facing out the rear on
the top center of the rear windshield. It can also be mounted
on the front windshield to record the interior of the vehicle.
POWER
The CDR895D utilizes a Y-Splitter and CAM 2 Extender Cable to
offer maximum flexibility and clean installation without dangling wires.
 Plug the Y-Splitter into the Micro USB Port on CAM 1.
 Connect the Micro USB end of the power cord into the Y-Splitter. Connect the USB end
of the power cord in the Cigarette Lighter Adapter and then plug into your vehicle.
 Plug CAM 2 into the Y-Splitter. Use the included CAM 2 Extender Cable if necessary.
 Organize and tuck away cables to make sure that the driver’s view is not obstructed. In
most vehicles it’s possible to tuck Y-Splitter and cables into the headliner and cleanly
hide the extender cable along the top wall all the way to the rear of the vehicle.
Professional installation is recommended.
If CAM 2 videos appear upside-down enter the Video Settings Menu on CAM 1 and turn Flip
Cam 2 to ON.
If you have mounted CAM 2 facing forward enter the Video Settings Menu on CAM 1 and turn
Mirror CAM 2 to OFF.
1
2

Cobra CDR855BT Specifications

General

Product color	Black, Grey
White balance	Auto
G-shock sensor	Yes
GPS (satellite)	-
Languages support	CHI (SIMPL), DEU, DUT, ENG, ESP, FRE, POR, RUS
Number of cameras	1
Main camera sensor	CMOS
Maximum frame rate	60 fps
Main camera resolution	1920 x 1080 pixels
Main camera viewing angle	160 °
Video compression formats	MOV
Main camera sensor resolution	2 MP
Image formats supported	JPG
Built-in storage media	No
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Cables included	Micro-USB, USB
Included memory card size	8 GB
Display diagonal	2 \
Power source type	Battery, Cigar lighter
Input operation voltage (max)	12 V

Weight and Dimensions

Depth	31.6 mm
Width	65 mm
Height	58 mm