Operating the Recorder
Playing Back a Recording
If the recorder is in Time mode, press to enter
Standby mode.
Press 1. to select a File Folder (A, B, C, D). The
Recording Number indicator in the upper-right
corner will display the total number of recordings in
the selected File Folder.
Press 2.
or to select a Recording Number.
The Time indicator at the bottom will display the
length of the selected recording.
Press 3.
to play the selected recording. During
playback:
Press
to pause playback. The LCD will
display “PAUSE”. Press again to resume
playback.
Press
to play the next recording.
Press
to play the previous recording.
Press and hold
to scan forward through
the current recording in second increments.
Press and hold
to scan in reverse through
the current recording in second increments.
Press
or to adjust the volume level
up or down.
Use the
key to change the Repeat
Playback options (Repeat, Repeat All). See the
“Repeat Playback Options” section below for
more information.
To Next Page
Loading...
Need help?
General
