Split
Select a recording to edit and then press and hold to
enter Edit mode. The LCD will display “EDT”.
Press 1. to advance to the time point at which
you want to split the recording. Press and hold
or to skip backwards or forwards in 30 second
increments.
Press 2.
when the desired time point has been
reached. The recording will pause.
Press 3.
to conrm the edit. The LCD will display
“EDT OK”. The recording has now been split into two.
The rst section is saved as the original record-
ing number. The second section is saved as the
last recording number.
You may press
to cancel at any time.
Remove a Section
Select a recording to edit and then press and hold to
enter Edit mode. The LCD will display “EDT”.
Press 1. to advance to the time point of the
section you want to remove. Press and hold
or to skip backwards or forwards in 30 second
increments.
Press 2.
when the desired starting time point has
been reached. The LCD will display “AST”. This marks
the start point of the section to be removed (A-Start).
Operating the Recorder
To Next Page
Loading...
Need help?
General
