Formatting the Recorder
Format the recorder to permanently erase all recordings
from the unit.
If the recorder is in Time mode, press . to enter
Standby mode.
Press and hold 2.
to enter Setup mode (the LCD
should read “SET”).
Press 3.
once. The LCD will display “FOR NO”.
Press 4.
or to change the setting between
“YES” and “NO”.
Select the “YES” setting and then press and
hold
to format the recorder. The LCD will
display “FOR ---” during the formatting process.
The process should take about seconds.
Select the “NO” setting to cancel and do noth-
ing. Press
to return to Standby mode.
Once a recording has been deleted it cannot be
recovered. Formatting will permanently destroy
all recordings on the unit.
To Next Page
Loading...
Need help?
General
