Page 14 Setup Mode
English
Page 14 Setup Mode
English
Setup Mode Â
Place the camera in setup mode to adjust the
camera’s internal options.
Setup Mode will let you adjust the following options:
Language
Date & Time
TV Out Mode
Power Frequency
View Firmware Version
To enter setup mode:
If the camera is on, turn it o.1.
Press and hold the 2. key. While holding down
the key, press and hold the key to turn the
camera on.
When you see the Coby Snapp HD screen, 3.
release the key (but continue to hold the
key).
Release the 4.
key when you see the “Date &
Time” setup screen.
To adjust the setup options:
Press 1. or to select an option to adjust.
Press 2. or to adjust the selected option.
Press 3. to save the settings and go to the next
screen, or press to cancel.
When all of the options have been set, the camera
will return to camera mode.
To Next Page
Loading...
Need help?
General
