25
11. Control unit operation
Adjustable range from 5 up to 50 Ncm, intermediate stage 32
Ncm. Keeping PLUS /MINUS depressed activates the repeat
function and the values are continuously increased /decreased.
When changing from 5 to 50 Ncm and 50 to 5 Ncm, a longer
confirmation signal is heard.
When the adjustable torque in the forward /reverse drive mode
is reached, the motor switches off automatically.
Press P3.
Increase torque in 5-Ncm-steps
Decrease torque in 5-Ncm-steps
Changing the torque (P3)
The accuracy of the set torque at 50 Ncm is ± 10% with the Osscora contra-angle handpiece.
Greater deviations are possible with other instruments.
To Next Page
Loading...
