26
11. Control unit operation
Factory setting 80% of maximum flowrate (max flowrate:
approx. 100 ml/min). Adjustable range 65%, 80% and
100%. Depressing PLUS /MINUS the values are continuously
increased /decreased.
Keep program button P2 depressed throughout this procedure!
Keep P2 depressed for approximately 4 seconds
(the adjusted coolant flow rate appears).
Keep P2 depressed and press PLUS button
to increase flow rate.
Keep P2 depressed and press MINUS button
to decrease flow rate.
After adjustment, the program button P2 illuminates and
is active!
Changing the coolant flow (P1–P3)
To Next Page
Loading...
