KANSO 2 SOUND PROCESSOR USER GUIDE 31
WEAR
Fitting the headband with Portable Charger
You can charge your processor while it’s in the headband
using the Cochlear Portable Charger. At the base of each
headband pocket there is an opening for the charger cable.
For more information on the charger, refer to the Chargers
User Guide.
To fit the headband with charger, follow these steps.
1. Open the headband and lay it flat, with the anti-slip
section facing you and the longer pocket lines at the top.
1 Hook and loop fastener
2 Pocket for processor
3 Anti-slip section for forehead
2. Open the base of the correct
pocket for your processor:
• left-side pocket (blue) for
left processor
• right-side pocket (red) for
right processor.
1 2 3 12
To Next Page
Loading...
